Skip to main content
Fig. 2 | Journal of NeuroEngineering and Rehabilitation

Fig. 2

From: Development and clinical validation of inertial sensor-based gait-clustering methods in Parkinson’s disease

Fig. 2

Model of transformation of clinically relevant gait phases into gait clusters within the 4x10 m test. The turning cluster (red) was determined based on the algorithm described in Turning isolation. A set of parameters per subject was calculated for each of the defined gait clusters. The constant (blue) and non-constant (gray) gait clusters were defined based on the corresponding clustering methods described in Clustering straight walking bouts into constant and non-constant gait cluster. The baseline cluster consists of all straight strides and is thus the combination of all constant (blue) and non-constant (gray) strides

Back to article page