- Open Access
Selective control of gait subtasks in robotic gait training: foot clearance support in stroke survivors with a powered exoskeleton
© Koopman et al.; licensee BioMed Central Ltd. 2013
- Received: 15 February 2012
- Accepted: 7 January 2013
- Published: 21 January 2013
Robot-aided gait training is an emerging clinical tool for gait rehabilitation of neurological patients. This paper deals with a novel method of offering gait assistance, using an impedance controlled exoskeleton (LOPES). The provided assistance is based on a recent finding that, in the control of walking, different modules can be discerned that are associated with different subtasks. In this study, a Virtual Model Controller (VMC) for supporting one of these subtasks, namely the foot clearance, is presented and evaluated.
The developed VMC provides virtual support at the ankle, to increase foot clearance. Therefore, we first developed a new method to derive reference trajectories of the ankle position. These trajectories consist of splines between key events, which are dependent on walking speed and body height. Subsequently, the VMC was evaluated in twelve healthy subjects and six chronic stroke survivors. The impedance levels, of the support, were altered between trials to investigate whether the controller allowed gradual and selective support. Additionally, an adaptive algorithm was tested, that automatically shaped the amount of support to the subjects’ needs. Catch trials were introduced to determine whether the subjects tended to rely on the support. We also assessed the additional value of providing visual feedback.
With the VMC, the step height could be selectively and gradually influenced. The adaptive algorithm clearly shaped the support level to the specific needs of every stroke survivor. The provided support did not result in reliance on the support for both groups. All healthy subjects and most patients were able to utilize the visual feedback to increase their active participation.
The presented approach can provide selective control on one of the essential subtasks of walking. This module is the first in a set of modules to control all subtasks. This enables the therapist to focus the support on the subtasks that are impaired, and leave the other subtasks up to the patient, encouraging him to participate more actively in the training. Additionally, the speed-dependent reference patterns provide the therapist with the tools to easily adapt the treadmill speed to the capabilities and progress of the patient.
- Robotic gait rehabilitation
- Reference trajectories
- Virtual model control
- Support of subtasks
- Adaptive control
- Impedance control
- Compensatory strategies
- Visual feedback
Many patients with neurological injuries, like stroke or spinal cord injury (SCI), suffer from muscle weakness, loss of independent joint control, and spasticity, often resulting in gait disorders. To regain functional mobility, these patients require task-oriented, high-intensity, and repetitive training[1–3]. Robotic gait-training devices are increasingly being used to provide this kind of training. They can provide highly repetitive, more frequent, and intensive training sessions, while reducing the workload of the therapist, compared to more conventional forms of manual-assisted (and body-weight-supported) gait training. Additionally, the assessment of the progress of the patient becomes more objective with the integration of different sensory systems, which can record interaction forces and gait kinematics.
Despite the reduction in labor intensity, the therapeutic effect of the different types of gait trainers is inconsistent. Pohl, et al., and Mayr, et al., reported a significant improvement in gait ability in subacute stroke patients, compared to conventional physiotherapy[5, 6]. Other studies found no significant difference between robotic support and manual treadmill training[7, 8], or conventional physiotherapy, although robotic gait training did show improvements in gait symmetry[7, 9]. Some results even indicate that manual treadmill training is superior to robotic assistance. Recently, a large multicenter randomized clinical trial suggested that the diversity of conventional gait training elicits greater improvements in functional recovery than robotic-assisted gait training. These contradicting results emphasize that robot-aided training needs to be further optimized to increase therapeutic outcome.
One of the most important factors that promotes therapeutic outcome is active participation. Active patient participation has been proven to be beneficial for motor learning in general[12–14] and is suggested to be important for rehabilitation of gait disorders. The “first-generation” devices, like the Lokomat (Hocoma AG, Switzerland) or AutoAmbulator (HealthSouth, USA), were initially developed based on the approach of enforcing gait upon a patient by moving the legs through a prescribed gait pattern. This diminishes the need for the patients to actively contribute to the required motion. Moving the legs in a rigid fashion is known to reduce and affect voluntary muscle activity compared to manual assistance, possibly making the patient reliant on the support. Rigid trajectory control also limits the natural gait variability and the possibility to make small movement errors. These small errors have been suggested to promote motor learning in mice as well as humans[19, 20].
To encourage active participation, and allow natural gait variability, more and more robotic devices control the interaction forces by using impedance or admittance control algorithms[21–29]. They guide the leg by applying a force rather than imposing a trajectory. Impedance (or admittance) control can also make the robot’s behavior more flexible and adaptive to the patient’s capabilities, progress, and current participation. Depending on the impedance levels, small errors are still possible, promoting motor recovery. Patients might also increase their motivation, since additional effort by the patient is reflected in their gait pattern. Controllers based on this principle are referred to as “assist-as-needed” (AAN), “cooperative,” “adaptive,” or “interactive” controllers. In mice, these AAN algorithms have been shown to be more effective than position-controlled training.
Using impedance control instead of position control, however, introduces new challenges. First, low impedance levels increase the risk that the subject and robot start to walk out of phase. Consequently, the robot will resist, rather than support, the subject. Different algorithms have been proposed to avoid synchronization problems. To account for alterations in cadence, the reference pattern of the robotic controller can be accelerated or decelerated, based on the difference between the current gait phase of the subject and the state of the robot. This can be done continuously or on a step-by-step basis.
Second, the impedance level needs to match the patient’s capabilities and progress, which can vary widely due to different levels of increased muscle tone, muscle weakness, or loss of coordinated control. This makes choosing the appropriate setting a priori a difficult process for the operator. In most applications, the amount of support is set by the operator on a trial-and-error basis. Setting the support levels too low can result in a dangerous situation, whereas too much assistance might reduce active participation of the patient. Roughly two strategies can be distinguished to automate the process of setting the support levels. The support levels can be adjusted based on increased patient effort (detected with force sensors), or based on kinematic errors. Emken, et al., developed an error-based controller with a forgetting factor. The algorithm systematically reduces the impedance levels when kinematic errors are small, whereas it increases the impedance when the errors are large. When the subject (unconsciously) reduces his effort, he will experience no support. Only when the subject fails to commit to the reference pattern for a longer duration of time, the support will be increased. This should prevent the patient from becoming reliant on the support. In parallel, it allows normal gait variability by lowering the impedance levels, when possible. Others use a deadband or a non-linear stiffness to allow normal variability, without causing the robot to increase its assistive forces[25, 29].
Third, even when the impedance levels are adaptive, the whole movement is still potentially supported. This implies that the patient receives support during gait phases where his performance decreases, making no distinction between the patient’s incapability, reliance, or fatigue. This also limits the possibility to focus the therapy on specific aspects of the walking pattern that require special attention.
Fourth, despite that impedance control does not rigidly impose a fixed reference pattern, it still requires some sort of reference pattern to determine the supportive force. These patterns are mostly based on pre-recorded trajectories from unimpaired volunteers. The major limitation of these patterns is that they are not publicly available. Additionally, most patterns are recorded at a limited number of speeds, while the progress of the patients’ preferred walking speed can be as small as 0.1 km/h.
In this paper, we extend the support strategy that we currently use in out gait trainer LOPES. Within this strategy, patients are supported based on the execution of their gait subtasks, rather than their complete leg movement. Recent simulation and experimental studies[32, 33] showed that the muscle activity during walking can be decomposed in different “modules.” Each of these modules can be associated with a specific subtask of walking (e.g., body weight support, forward propulsion or foot clearance). In stroke survivors, each of these subtasks can be impaired to some degree without automatically affecting others. Selectively supporting these subtasks, based on the capabilities and progress of the patient, can be seen as an extension of the “assist-as-needed” principle. Also, the subtasks of both legs can be regarded separately, since in most stroke survivors the paretic leg will be more affected than the non-paretic leg. Controlling gait subtasks, rather than joint angles, also implies that compensatory strategies, like hip circumduction to create more foot clearance, can still be used. Imposing a symmetrical joint-angular reference pattern also limits the possibility of the non-paretic leg to compensate for the deficiencies of the paretic leg.
For the foot-clearance subtask, we developed a controller based on the Virtual Model Control framework. This kind of control provides an elegant way to prevent synchronization problems by only controlling a specific subtask during the corresponding phase of the gait cycle. Using Virtual Models for different subtasks also allows straight-forward adaptation of the support to the subject’s specific needs by only turning on the controllers for impaired subtasks. A pilot study on a small number of healthy subjects already showed that this method allows selective control of foot clearance, while leaving the remaining walking pattern largely unaffected. However, also within a specific subtask, the amount of support needs to match the specific needs of the patient. The support should be such that 1) large errors are prevented, 2) safe walking is guaranteed, 3) small errors and variations over steps are allowed and 4) reliance is minimized. In another pilot study we incorporated the adaptive algorithm, that shaped the impedance as a function of tracking performance, and that was introduced by Emken, et al.. With that pilot study we showed that the stiffness profile converged to a subject-specific pattern, that varied over the gait cycle and matched the subject’s needs. During the various pilot experiments, we also experienced that visual feedback, based on basic gait parameters like foot clearance, is easier to interpret for patients and therapists than feedback in terms of joint angles or interaction torques.
The main contribution of this paper is to show the effectiveness of selective-subtask-support, in conjunction with adaptive support levels, in stroke survivors. Young healthy subjects will be used as a control group. Secondly, a new method to quantify reliance will be tested. Since reliance, or “slacking,” is known to be present in upper-limb robotic support, and is considered to be an undesired effect, we try to investigate this phenomena using catch trials. Catch trials are often used in motor learning experiments to evaluate human behavior during prolonged exposure to external stimuli. To our knowledge, this type of methodology, to quantify reliance in lower-limb robotic gait training for stroke survivors, has not been used before. Because reliance is closely related to the feedback that the patient receives, we also developed a system to provide the patient with visual feedback about his performance. Thirdly, we will investigate the use of compensatory strategies in the robotic gait trainer. Since LOPES allows hip abduction, patients are allowed to employ their compensatory strategies in the device. This puts us in the unique position to evaluate whether patients reduce their compensatory strategies when they receive robotic support. Before testing the VMC framework, we will also present a new method, and results, of constructing reference trajectories for the ankle movement at different speeds. First, the pattern is parameterized by defining different key events (minima, maxima etc.), which are extracted from the individual patterns. Next, the walking speed and body-height dependency of the parameters are determined by regression models. These regression models can be used to reconstruct patient-specific ankle movement patterns at any speed.
Eleven healthy elderly subjects (five male, six female, age 57.3 ± 5.9, weight 74.9 kg ± 11.9, length 1.70 m ± 0.11) volunteered to participate in an experiment that was setup to collect the reference patterns that are required for VMC of the step height. All subjects had no symptoms of orthopedic or neurological disorders and gave informed consent before participating in the experiments.
Gait kinematics were recorded using an optical tracking system (Vicon Oxford Metrics, Oxford, UK) at a frequency of 120 Hz. To track the motion of the subject, twenty-one passive reflective markers were attached to bony landmarks on the legs and trunk. The subjects were asked to walk on a treadmill at seven different speeds: 0.5, 1, 1.5, 2, 3, 4 and 5 km/h. After a general familiarization period of three minutes, the subjects walked for three more minutes at each selected speed. During each trial, the subjects did not receive any specific instructions about how to walk on the treadmill. After each trial, the subject had a one-minute break.
Different steps were taken to derive the regression models.
Only the last minute of each trial was used for data analysis. The recorded marker positions were processed using custom-written MATLAB software. Since the proposed VMC approach is end-point based, we do not require the hip and knee angular reference patterns, but only the ankle pattern in Cartesian space.
Key events and predictor variables
Where v represents the walking speed and l the body height. y represents the index, position or velocity of a particular key event. Stepwise regression was used to test the statistical significance of the predictor variables, using entrance/exit tolerances of 0.05 on the p-values.
Now that the regression models for the key events are known, a reference pattern can be reconstructed for each walking speed (in the range of 0.5-5.0 km/h). First, the index, position, and velocity of the key events, for a certain speed and body height, are calculated. Next, a cubic spline is fitted between every pair of consecutive key events, resulting in 6 (3rd order) polynomials describing the ankle-height pattern. By definition the position and velocity of the first key event (at 0 percent of the gait cycle) and the end of the last spline (at 100 percent) are equal. The resulting set of splines are merged to construct the reference pattern over the complete gait cycle.
To determine the accurateness of the spline-fitting procedure, we compared the constructed splines (based on data from the right ankle of all subjects) with the left ankle pattern of each subject. First, we reconstructed the reference patterns for the set of walking speeds (0.5-5 km/h) for each subject, taking into account the subject’s individual body height. Next, their average left ankle pattern, during the last minute of walking at the different speeds, was calculated and the Root Mean Square Error (RMSE) between both signals was calculated. The resulting RMSE was averaged across subjects, for each speed.
Additionally, the correlation coefficient was used to quantify the similarity between the left ankle pattern and the reconstructed pattern. Both comparisons were performed for the ankle-height profile and the ankle-height velocity profile.
Selective support of subtasks
Clinical description of patient group
Time since stroke (month)
Type of stroke
Experimental apparatus and recordings
Linear and rotary potentiometers measured translations and angular rotations of all degrees of freedom. Kinematics were used to detect heel contact (HC) and toe-off (TO) events. HC and TO were used as triggers to switch the robotic support on and off, and used to segment the data into individual strides.
xPC Target was used for real-time control at 1000 Hz. From the measured exoskeleton joint angles, and the human segment lengths, the ankle position is calculated at each instant of time. Data is collected on the target computer in real-time and then transferred to a host machine, where it was sampled at 100 Hz and stored for off-line analysis, using custom software (MATLAB, Mathworks Inc., Natick, MA, USA). For all subjects we measured joint kinematics (angles and Cartesian positions), the torques applied by the LOPES, and the gait phases.
Virtual model control
Initial testing showed that no damping was needed, since the human limbs provide a kind of natural damping to the system. The reconstruction of the reference ankle-height pattern is explained in the next section.
For foot-clearance support, only support in vertical direction is required, therefore F x is zero. The symbols are defined in Figure 4.
Reference pattern reconstruction
For the patient group, the reference pattern is reconstructed in the way described before, using the obtained regression models (see spline fitting). In order to investigate the effectiveness of the VMC approach for healthy subjects, we chose to increase the reference pattern, since the subjects were expected to already walk according to the pattern. The shape of the reference pattern is calculated similarly as in the patient group, but the obtained pattern was multiplied such that the maximal ankle height of the reference pattern reached a 15-percent increase with respect to their nominal maximum ankle height. The nominal ankle height of each subject was obtained from a walking trial in LOPES where no support was provided.
To prevent synchronization problems a specific subtask is only supported during the phases in which the subtask should be performed. For the step-height support, this indicates that the controller is only active during the double stance (with the contralateral leg in front) and the swing phase. Heel contact and toe-off events were detected in real time based on a phase-detection method developed by Zeni, et al.. To account for alterations in cadence the speed at which the reference trajectory is replayed is scaled to the previous cycle time, and the timer is reset at the contralateral heel contact.
Where the superscript i denotes the ith step cycle, f is a forgetting factor set to 0.9, g is an error-based gain set to 1800, K z is the resulting stiffness profile for the ankle height, and t indicates the percentage of the gait cycle, which is estimated based on the previous cycle time. The stiffness was constrained to positive values, since the support is intended to lift the ankle, and not push the ankle downwards, when the ankle is above the reference.
Before positioning a subject in the LOPES, different anthropometric measurements were taken to adjust the exoskeleton segments lengths. Next, the subject was positioned into the LOPES and the trunk, thigh, and upper- and lower shank were strapped to the exoskeleton.
After a general familiarization period, the preferred walking speed was determined for each stroke survivor individually. During this familiarization period, LOPES was operated in the zero-impedance mode. In this mode the impedance of every joint is set to zero, so the robot provides minimal resistance/assistance to the stroke survivor. All patient trials were performed at the same predefined preferred walking speed. All healthy control subjects walked at 3 km/h.
Next, the stroke survivors, and healthy control subjects, were exposed to selective control of the step height with a compliant (600 N/m), stiff (1200 N/m) and adaptive virtual spring (see impedance shaping). The stiffest of these springs was chosen as having the maximum stiffness that was comfortable for subjects during pilot experiments. For the healthy control subjects all conditions were tested on the right leg only, while the left leg was operated in zero impedance. The stroke survivors were supported on their impaired side.
For the patient group, we intended to use visual feedback to maximally motivate the subjects in taking higher steps. To investigate if subjects are capable of translating the information from a simple visual feedback system into the appropriate action, the visual feedback system was first tested on the healthy control group. The visual feedback system consisted of a screen, showing bars that represented the maximum ankle height of their most recent step. Also, the target height was displayed. Preliminary results showed that healthy subjects were able to use this visual feedback to reach the target height very accurately. Therefore, it was decided to provide this kind of visual feedback to the patient group in almost all conditions.
List of the tested conditions
In general, the effectiveness of the step-height controller was assessed by determining how well the set reference values were attained, and how the support affected other aspects of walking. First, the data was segmented into separate steps based on the heel contact events. Next, different spatiotemporal gait parameters were extracted from the ankle trajectories: the maximal ankle height (step height), the step length, and the cycle time. The maximum ankle height is the maximum vertical displacement of the ankle during swing. The step length is the relative horizontal displacement of one ankle with respect to the opposite ankle at the moment of heel contact. All gait parameters were normalized with respect to their nominal values. This allowed for comparison across subjects and conditions. For the healthy subjects, as well as the stroke survivors, the nominal values were recorded during a trial in which they walked in the zero impedance mode. Additionally, the relative duration of the different gait phases was calculated. All parameters were obtained for the exposure, as well as the catch blocks. Group averages were calculated for the stroke survivor and healthy control group.
To investigate the reduction of compensatory strategies, we also determined the maximum knee flexion, maximum hip abduction, and maximum pelvic height for the stroke survivors during the different conditions. Stroke survivors, with stiff-knee gait, for example, often fail to reach enough toe clearance and use different compensatory strategies to overcome their reduced knee flexion. Common strategies are a circumduction strategy, pelvic hiking, and vaulting. Vaulting is caused by an increase of the plantar flexion of the non-paretic leg, pushing the pelvis upward and creating more foot clearance on the paretic size. We hypothesize that, when stroke survivors experience step-height support, they reduce their compensatory strategies. Thus, assisting one subtask might automatically correct gait kinematics elsewhere.
To investigate the selectivity of the VMC support, we first used a one sample t-test to determine whether the percentage change in the spatiotemporal parameters differed from 0 percent. If the step-height support significantly influenced one of the defined spatiotemporal parameters, we used a paired t-test to assess whether there was a statistically significant difference between the conditions with the compliant and stiff virtual spring. All statistical tests were performed with SPSS Statistics (IBM Corporation, Armonk, NY, USA). The level of significance was defined at 5 percent.
Regression models for the reference patterns
Regression models for the index, position and velocity of the different key events
1st local max vel.
2nd local max vel.
2nd local min vel.
β 0 (Intercept)
β 1 (speed)
β 2 (speed 2 )
β 3 (body height)
0. 572 x10-2
1st local max vel.
2nd local max vel.
0. 345 x10-2
2nd local min vel.
0. 231 x10-2
β 0 (Intercept)
β 1 (speed)
β 2 (speed 2 )
β 3 (body height)
0. 732 x10-3
0. 466 x10-3
1st local max vel.
−0. 207 x10-3
2nd local max vel.
0. 970 x10-3
2nd local min vel.
0. 628 x10-3
As a reference, we also calculated the RMSE and correlation coefficient between the measured right and left ankle patterns. These values provide an indication of the achievable fitting quality (see Figure 6). The correlations between the reconstructed spline and left leg data were very close to the correlations between the left and right leg data, whereas the RMSE values were approximately twice as large.
Healthy control group
Selective and gradual support
Non-adaptive support does not induce reliance
Visual feedback enhances performance and active participation
Selective and gradual support
Providing step-height support to the stroke survivors resulted in a selective increase in step height, without significantly affecting the other basic gait parameters, including the relative duration of the different gait phases (see Figure 7). The support was also gradual, since the use of the stiff controller resulted in a significant increase in step height compared to the compliant controller. The stroke survivors show a larger standard error of the mean of the paretic step height, compared to the right step height of the control group. For the compliant controller the increase in nominal step height ranged between 0 and 26 percent, whereas the increase in step height due to the stiff controller ranged between 0 and 44 Percent. For the stiff controller the average maximum joint torques were 21.0 Nm hip extension and 17.4 Nm knee flexion. The stroke survivors also show an asymmetry in stance phase (see Figure 7), which is often observed in stroke survivors.
Non-adaptive support does not induce reliance
Similar to the healthy control group, we did not find any evidence that indicated that the stroke survivors started to rely on the support. We did not find a significant difference between the initial exposure and the end of the exposure blocks (see Figure 10). This is also confirmed by the catch blocks, which show that during support (with the compliant or stiff VMC) the stroke survivors drop back to their baseline, without any significant undershot.
Visual feedback enhances performance and active participation
No reduction of compensatory strategies
The purpose of this study was to assess the effectiveness of selectively supporting the step height during the swing phase. First, we derived regression models for the key events of the reference ankle-height pattern. These models can be used to reconstruct patient-specific reference patterns at any speed. The proposed step-height VMC was tested on healthy subjects and chronic stroke survivors, and proved effective in selectively influencing the step height. Additionally, the step height could be manipulated easily by changing the impedance levels. Incorporation of an impedance-shaping algorithm resulted in an adaptation of the impedance to the specific needs of every individual stroke survivor. Catch trials were used to investigate whether healthy subjects, or stroke survivors, would start to rely on the robotic support, but revealed no signs of reliance. The step height parameter was used to provide intuitive visual feedback. Both groups were able to utilize this feedback. We did not find evidence that the stroke survivors reduced their compensatory strategies when support was provided.
Reference pattern reconstruction
A large part of this paper concerns the reconstruction of the reference patterns. Throughout the literature, different strategies exist to determine these reference patterns. Most reference patterns are based on pre-recorded trajectories from unimpaired volunteers walking on a treadmill[24, 29, 44, 45], or based on walking in the device while it is operated in a transparent mode[21, 27], or with the motors removed. Patient-specific patterns can be obtained by recording the gait trajectories while the patient walks with manual assistance[21, 27], or by defining joint patterns based on movements of the unimpaired limb. Most methodologies, however, have certain considerations that limit the use of the recorded trajectories to a specific application.
A major limitation of most of these reference patterns is that it is unknown how to correct for changes in speed. Most pre-recorded trajectories are recorded at a limited number of speeds, while the progress of the patients’ preferred walking speed can be as small as 0.1 km/h. The coupling between the right and left leg will change at different speeds and the recorded pattern, obtained during manual assistance[21, 27], will only be valid for that specific speed. Scaling algorithms can be used to compensate for changes in speed or cadence. Most scaling algorithms, however, apply scaling in time, amplitude and offset, whereas also the (relative) timing of the maximum joint angles changes at different speeds.
For the patterns recorded in the gait trainer itself, another limitation should be noted. Due to the mass and inertia of the device, and/or imperfections of the transparent mode, these patterns might not match with the ones recorded during free walking. Emken, et al., found that the added inertia resulted in a slightly higher stepping pattern compared to free walking, while others found a significant and relevant decrease in knee angular range due to the device.
Most pre-recorded trajectories are obtained by rescaling the gait pattern to a percentage of the gait cycle, and taking the mean across subjects. This introduces another issue. Averaging normalized data can result in an underestimation of the extremes in the gait pattern, when the subjects have a different distribution of the gait events throughout the gait cycle.
Therefore, we developed a method where the gait pattern is parameterized by defining different key events (minima, maxima etc.), which all have a timing, position, and velocity. Next, the walking speed and body-height dependency of the parameters are determined by regression models. This way, the extreme value in the reconstructed pattern is actually based on the extreme values of the individual patterns, even when the extremes occur at another percentage in the gait cycle.
Another advantage of the proposed method, compared to other available methods, is that it can be used to construct a reference ankle-height pattern at each particular walking speed between 0.5 and 5.0 km/h, for persons with different body heights. This allows the physical therapist to easily increase the training speed, even within a single walking session. Speed-dependent reference pattern adjustments are also essential when the patient is in control of the walking speed, either manually or with intuitive speed-adaptation algorithms.
The proposed method is also generally applicable and can be applied to reconstruct speed-dependent reference patterns for joint angles. Different studies have already shown that peak joint kinematics are dependent in a linear and/or quadratic way on walking speed, and that its occurrence (timing) is also speed dependent.
There were some limitations in deriving the regression equations, which are related to the relatively low number of subjects (11) in this study. Due to this small number, we did not derive separate equations for male and female subjects, whereas systematic effects of gender of kinematics have been reported. The range of body heights in this group of subjects was limited (1.52 m to 1.86). However, this range is expected to be sufficient for the majority of the elderly population.
Selective and gradual support
The results from the stroke survivors and healthy control group showed that the step-height VMC could selectively influence the step height. Supporting the step height did not significantly affect other spatiotemporal gait parameters, like non-supported step height, step length, or relative gait phase duration. Although the subjects were free to adapt their cadence, no change in cycle time was observed. As expected, the support was also gradual, a higher stiffness resulted in a closer approximation of the target values.
On average, the stroke survivors received more supportive hip and knee torque. At baseline, the stroke survivors walked more below the reference than the healthy subjects, resulting in more supportive torque.
The stroke survivors also showed a larger standard error of the mean of the paretic step height, compared to the right step height of the control group. For the healthy subjects, the reference ankle-height pattern was scaled such that it reached a 15-percent increase with respect to their nominal maximum ankle height. For the stroke survivors, the reference pattern was purely based on the regression formulas. The stroke survivors who were less affected, and almost reached their target value without support, showed a smaller (relative) increase in step height, compared to the patients that performed less without the support.
Selective-subtask-support already allowed us to focus the robotic support on the subtasks that are impaired. However, also within a subtask, the amount of support needs to be minimized to the personal needs of the patient. Aoyagi, et al., already suggested that by scheduling the impedance as a function of the gait cycle, the assistance can be further personalized. This, however, is impossible for the operator to manually adjust. Therefore, we chose to adopt an adaptive algorithm, that shaped the impedance based on the tracking performance, that was suggested by Emken, et al..
Emken, et al., reported that the impedance converged repeatedly over separate trials. Although we only performed one trial with the adaptive algorithm per patient, the impedance profile shaped according to the initial error between ankle and the reference trajectory for all patients. This indicates that the shaped impedance was directly related to the patient’s incapabilities.
All stroke survivors converged to a stiffness profile where the stiffness was highest at swing initiation. This is in agreement with the trials where a constant stiffness was used. There, most of the assistive torques were exerted during swing initiation, indicating that that phase requires most of the support. Because of the provided torques during initial swing, the leg was propelled upward with a higher velocity, and required less support during the remainder of the swing phase. Anderson, et al., already demonstrated the importance of knee angular velocity at swing initiation in normal gait. They showed that the knee angular velocity at heel off was the main determinant for the maximal knee angle, and foot clearance, during swing. Reduced angular velocity, and foot clearance, in stiff-knee gait is suggested to be caused by an abnormal knee flexion during swing initiation. Kerrigan, et al., and Riley, et al., found an inappropriate activity in at least one of the quadriceps muscles during the pre-swing or initial swing phase[55, 56], which inhibit a normal knee flexion. Kerrigan, et al., also reported that patients with delayed heel rise achieved less peak knee flexion. The patients included in this study also showed a delayed heel rise. So, providing support during this phase seems like a natural, and the most effective, way to increase the maximum knee angle, and subsequently foot clearance.
Apart from shaping the impedance to the patient’s individual needs, minimizing the impedance also allows more variability within the stepping pattern, which has been shown to promote motor learning in mice. Emken, et al., reported an increase in variability in maximum step height and step length, but could not verify whether increasing the variability during gait training had a positive effect on EMG activity levels. In our study, we did not investigate the variability within the gait pattern. We did see a clear reduction in the impedance levels where the stroke survivors required less support, which allows them to vary their steps in a more natural way compared to walking with a stiff controller. The possibility to make small gait variation was also promoted by using a unidirectional spring that only provided support in taking a higher step, thus not constraining the ankle when it reached above the reference.
Based on previous pilot experiments, and computational models of movement training, we hypothesized that the stroke survivors and healthy controls would start to rely on the support, such that when assistance is no longer provided, their performance becomes worse. Previous studies, that let subjects adapt to external force fields, already showed that the human motor system can be modeled as a process that greedily minimizes a cost function, consisting of a weighted sum of kinematic error and effort[58, 59]. In these studies, a forgetting factor is introduced in the human effort, which models that the human continuously tries to accomplish the prescribed movement with reduced effort.
In this study, however, we did not find patients, or healthy subjects, who started to rely on the support. A likely explanation for the patient group could be the visual feedback, which we did not use in the pilot experiment. The visual feedback provided them with information about their performance on a step-by-step basis, increasing their motivation and reducing the changes of reliance.
Also in the healthy control group, who did not receive visual feedback in most trials, we did not observe reliance. To evaluate the effects of prolonged exposure, the trials were concluded with 50 steps of continuous exposure. This block might have been too short for the subjects to explore the benefits of the support and start to rely on it. The relatively low impedance levels might contribute to this effect.
Also the task instruction and type of support might explain our findings. In most motor learning experiments, a disturbing force field is applied and the subjects are asked to reduce the error. To reduce the error, the subjects have to produce additional effort to overcome the disturbance. During this process, they continuously try to minimize the trade-off between reducing their effort and increasing the error[58, 59]. In our experiments, the subjects experience a force field that decreases, rather than increases, the performance error. Here, the subjects are not challenged to provide additional effort, which might not elicit them to reduce their effort.
The fact that a relative small movement error can cause the subjects to trip might also have contributed to the fact that these subjects did not start to rely on the support. This would indicate that the weight of the error in the cost function increases compared to the reduction in effort. Bays, et al., already suggested that humans can change the weighting of different costs, according to the task and type of the movement.
Although the chances that reliance will occur are reduced by minimizing and localizing the support with the impedance shaping algorithm, two issues remain. First, the algorithm cannot distinguish between a decrease in effort due to reliance or due to fatigue. In both cases, the algorithm will increase its support. Second, subjects might still, consciously or unconsciously, reduce their effort over time and consequently receive more support. Emken, et al., showed that, to effectively assist-as-needed, the robot must reduce its assistance at a rate that is faster than that of the learning human. They stated that reliance can be prevented by setting the forgetting factor to a lower value than the learning rate of the subjects. They also state that determining the learning rate for neurological patients can be difficult because of their impaired motor control due to spasticity, muscle weakness, and synergies. Therefore, we chose to set the forgetting factor based on a stable convergence of the stiffness pattern within approximately 30 steps.
Finally, one might argue that to eliminate reliance one should apply resistive forces rather than supportive forces. In fact, error-enhancing therapy is suggested to be more effective than assistive therapy[20, 61]. For some training exercises, where movement errors do not impose serious safety issues, this might be true. For robotic treadmill training, where small movement errors can have large consequences, this strategy may be inappropriate.
In this study, very simple visual feedback was provided in the form of the step-height parameter. We showed that both the stroke survivors and the healthy controls were capable of utilizing this information effectively. Providing visual feedback to the healthy controls led to a very close approximation of the reference values. Adding visual feedback to the trials, in which the stroke survivors received adaptive support, led to lower impedance levels in three of the four patients, indicating that these patients are additionally motivated by the visual feedback.
The key element of any form of feedback is that it displays the subject’s effort in an intuitive manner. Different forms of feedback are available. A review performed by Teasell, et al., concluded that there is a positive effect of EMG feedback in patients after stroke. Others use the subject’s kinematics to display their performance[25, 29], or the interaction force between user and robot, like in the Lokomat.
A disadvantage of the latter approach is that it is only applicable to position-controlled gait trainers. In these type of gait trainers, the additional effort of the subject is reflected on the screen, but is not reflected in their gait pattern. This might decrease the motivation of the subject. Thus, to optimize visual feedback, the gait trainer needs to be compliant. In more recent versions of the Lokomat, Duschau-Wicke, et al., introduced a more patient-cooperative strategy, effectively making the robot more compliant. In their study, they used body kinematics as visual feedback.
To optimize the feedback, factors like the amount of information and its frequency need to be investigated. Also the complexity of the feedback is important - do we need detailed information from every joint, or combined information from several joints, like the ankle position? Banala, et al., only displayed the ankle position in the sagittal plane. Our results suggest that only showing the maximum ankle height of the last step is already sufficient to control the hip and knee joint such that the subject takes a higher step. Also, for the therapist himself, we expect that feedback in the form of basic gait parameters will be easier to interpret, compared to joint angles or ankle trajectories.
The primary goal of visual feedback is, of course, to contribute to the long-term changes in relearned gait kinematics. Kim, et al., used the ALEX to induce gait modification in healthy adults. They reported that a combination of visual and force guidance resulted in larger modifications in step height that maintained longer, persisting up to two hours, whereas only visual guidance or only force guidance evoked changes that did not last beyond the 10-min retention test. Although we did not investigate retention, our experience with visual feedback is encouraging, and can serve as a starting point in the investigation about how to optimize gait training in such a way that short-term gait adaptation can become long-lasting gait modification.
The VMC approach, used in this study, is an end-point-based-control strategy. This implies that within a certain subtask there is more freedom to walk, or choose a certain strategy. For example, different patients might choose different strategies to accomplish appropriate foot clearance. With the step-height VMC, the patients are left free in the strategy they use to clear their foot and will only receive support when this task is not executed successfully. This means that compensatory strategies[64, 65], like pelvic hiking, hip circumduction, or vaulting[66, 67], which are seen in most stroke survivors, can still be employed. Joint control limits the use of these strategies. Additionally, imposing a symmetrical joint-angle pattern limits the possibility of the non-paretic leg to compensate for the deficiencies of the paretic leg. Although these compensatory strategies do not contribute to a more symmetric walking pattern, they do increase basic gait function[68, 69]. Some even advocate teaching compensatory strategies because of time and financial limitations. Thus, because it is still largely debated whether the focus of robotic gait training should be on restitution of a normal walking pattern or on these compensatory strategies, they should not be overruled.
The use of these compensatory strategies might even become redundant when support is provided on the impaired subtask that evokes these compensatory strategies. We hypothesized that providing support on one subtask, i.e. foot clearance, would reduce the need for the patient to employ his compensatory strategies. Although all our stroke survivors showed compensatory strategies without support, none of them reduced their compensatory strategies with support. During the experiments, the stroke survivors received no specific instructions about how to walk on the treadmill. Therefore, they might not have been triggered to reduce their compensatory strategies. Also, the limited time that the stroke survivors walked in the LOPES during the experiments, in combination with the amount of time it would take to un-teach their adapted strategies, might be a reason for the unchanged kinematics. In the future, we might even develop special VMC modules that suppress compensatory strategies to promote restitution of a symmetrical walking pattern.
Different support methods have been suggested to correct the gait pattern of neurological patients. However, none of the compliant, or interactive, support methods has been evaluated in large-scale clinical trials. To guide potential clinical trials, the differences between our and other approaches will be explained. The method presented in this paper can be best compared to the “virtual tunnel” approach. Banala, et al., implemented this virtual tunnel approach, which was previously described by Chai, et al.,, and trained two chronic stroke survivors with the ALEX. Their tunnel consisted of a healthy-control template and the assistance was composed of a normal force, that simulated the virtual walls, and a tangential force that helped the ankle move along the trajectory. A similar virtual tunnel strategy is implemented in the Lokomat to train iSCI patients. Duschau-Wicke, et al., also implemented a “moving window” that limits free movement to a region of the tunnel, similar to the tangential force in the ALEX. In contrast to Banala, et al., they defined a torque field in joint space rather than a force field in Cartesian space. There are three main differences between the above-mentioned control strategies and the control strategy presented in this study.
First, both the ALEX and the Lokomat use some sort of support that potentially helps the ankle, or joint, move along the trajectory. The tangential force, used by Banala, et al., decreases when the ankle deviates from the trajectory, thus the ankle is only pushed along the path when the ankle is close to the desired trajectory. Duschau-Wicke, et al. use the moving window, that is synchronized with the user’s cadence, to assist the user. In our study, no tangential force, or moving window, is used. Within the subtask-support strategy, step timing and foot clearance are two separate subtasks. Here, we only supported foot clearance. This allowed the subjects to freely change their timing, if they wished to do so. Still, subjects did not adapt their timing. For bilateral affected iSCI patients, who experience difficulties during swing initiation, or gait initiation in general, gait-timing assistance might be useful. In that case an additional VMC in the horizontal plane can be added. Our experience with stroke survivors suggests that the non-paretic leg can take care of the gait timing and the paretic leg will follow.
Second, both studies use a virtual tunnel that lifts the ankle, or increases joint angles, but can also do the opposite when the subject performs above the reference. In this study, a unidirectional spring was used, because the support is intended to support the subject in taking higher steps, and not push the ankle downwards, when the ankle is above the reference.
Third, in contrast to the Lokomat, the support of subtasks is an end-point-based-control strategy, rather than a joint-angle-based-control strategy. As mentioned before, joint-angle-based-control strategies exclude the use of compensatory strategies.
Future applications of selective support
The key goal of future research is to expand the concept of subtask support. Support in taking higher steps is an important part of the rehabilitation process, but other subtasks might also require assistance. A new VMC, that assists patients in taking more symmetric steps, is currently under development, and its interaction with other subtask controllers is being investigated.
For severely affected patients, body weight support systems (BWSS) are often used. Alternatively, VMC can also be used to partially support the body weight by attaching a vertical virtual spring to the hips. In that case, the forces, required to bear your own body weight, are provided in terms of hip and knee torques, rather than lifting the body externally. This allows normal sensory input from the foot soles, which is essential in order to generate natural gait kinematics[72, 73]. VMC for body weight support also allows easy modulation of the amount of support between the different legs, since stroke patients primarily need support during the stance phase of the affected leg. It also enables separate control of body weight support and balance support, which can be considered as two separate subtasks, either of which can be impaired to a certain degree. BWSS, with an overhead harness, not only provide a force in the pure vertical direction, but also in the horizontal plane that stabilizes the body. Pilot experiments have shown the feasibility of body weight support with VMC. The possibilities of VMC for balance support are now being investigated.
Finally, we started preliminary tests with an intuitive speed-adaptation algorithm, in which the patient can move freely over the treadmill and the speed is automatically adapted when the patient deviates from the center of the treadmill. In conjunction with the obtained speed-dependent reference patterns, this will provide the therapist and patient with tools to easily adapt the treadmill speed to the capabilities and progress of the patient, without the need to manually change the control settings.
In this study we implemented, and evaluated, a VMC strategy for selective and gradual support of gait subtasks. Here we focused on one specific subtask, i.e. increasing foot clearance. Initially, we derived and provided regression models that can be used to reconstruct patient-specific ankle movement patterns based on body height and walking speed. The RMSE between the predicted and actual trajectory was around 1 cm for all walking speeds. The proposed method can also be applied to reconstruct speed-dependent reference patterns for joint angles. Experiments with healthy subjects, and chronic stroke survivors, showed that with the proposed VMC approach, the step height could be selectively and gradually influenced, without affecting other spatiotemporal gait variables. In conjunction, we tested an impedance-shaping algorithm, which shaped the impedance to the patient’s individual needs. The provided support did not result in reliance on the support for both the stroke survivors as well as the healthy control groups. Providing visual feedback to the user resulted in an increased active contribution in all healthy subjects and three of the four stroke survivors. The presented VMC approach, and impedance shaping, can be crucial for the development of new rehabilitation strategies and robotic gait trainers. It allows automatic localization and minimization of the support, which increases active patient contribution and promotes functional recovery.
This study was supported by a grant from Dutch Ministry of Economic affairs and Province of Overijssel, the Netherlands (grant: PID082004). We would like to thank Jaap Buurke and Martijn Postma, from the Roessingh Research and Development, for their assistance during the patient experiments.
- Kwakkel G, Van Peppen R, Wagenaar RC, Wood Dauphinee S, Richards C, Ashburn A, Miller K, Lincoln N, Partridge C, Wellwood I, Langhorne P: Effects of augmented exercise therapy time after stroke: a meta-analysis. Stroke 2004, 35: 2529-2539. 10.1161/01.STR.0000143153.76460.7dView ArticlePubMedGoogle Scholar
- Kwakkel G, Wagenaar RC, Koelman TW, Lankhorst GJ, Koetsier JC: Effects of intensity of rehabilitation after stroke. A research synthesis. Stroke 1997, 28: 1550-1556. 10.1161/01.STR.28.8.1550View ArticlePubMedGoogle Scholar
- Teasell R, Bitensky J, Salter K, Bayona NA: The role of timing and intensity of rehabilitation therapies. Top Stroke Rehabil 2005, 12: 46-57. 10.1310/ETDP-6DR4-D617-VMVFView ArticlePubMedGoogle Scholar
- Hidler J, Nichols D, Pelliccio M, Brady K: Advances in the understanding and treatment of stroke impairment using robotic devices. Top Stroke Rehabil 2005, 12: 22-35. 10.1310/RYT5-62N4-CTVX-8JTEView ArticlePubMedGoogle Scholar
- Pohl M, Werner C, Holzgraefe M, Kroczek G, Mehrholz J, Wingendorf I, Hoolig G, Koch R, Hesse S: Repetitive locomotor training and physiotherapy improve walking and basic activities of daily living after stroke: a single-blind, randomized multicentre trial (Deutsche GangtrainerStudie, DEGAS). Clin Rehabil 2007, 21: 17-27. 10.1177/0269215506071281View ArticlePubMedGoogle Scholar
- Mayr A, Kofler M, Quirbach E, Matzak H, Frohlich K, Saltuari L: Prospective, blinded, randomized crossover study of gait rehabilitation in stroke patients using the Lokomat gait orthosis. Neurorehabil Neural Repair 2007, 21: 307-314. 10.1177/1545968307300697View ArticlePubMedGoogle Scholar
- Westlake KP, Patten C: Pilot study of Lokomat versus manual-assisted treadmill training for locomotor recovery post-stroke. J Neuroeng Rehabil 2009, 6: 18. 10.1186/1743-0003-6-18PubMed CentralView ArticlePubMedGoogle Scholar
- Werner C, Von Frankenberg S, Treig T, Konrad M, Hesse S: Treadmill training with partial body weight support and an electromechanical gait trainer for restoration of gait in subacute stroke patients: a randomized crossover study. Stroke 2002, 33: 2895-2901. 10.1161/01.STR.0000035734.61539.F6View ArticlePubMedGoogle Scholar
- Husemann B, Muller F, Krewer C, Heller S, Koenig E: Effects of locomotion training with assistance of a robot-driven gait orthosis in hemiparetic patients after stroke: a randomized controlled pilot study. Stroke 2007, 38: 349-354. 10.1161/01.STR.0000254607.48765.cbView ArticlePubMedGoogle Scholar
- Hornby TG, Campbell DD, Kahn JH, Demott T, Moore JL, Roth HR: Enhanced gait-related improvements after therapist- versus robotic-assisted locomotor training in subjects with chronic stroke: a randomized controlled study. Stroke 2008, 39: 1786-1792. 10.1161/STROKEAHA.107.504779View ArticlePubMedGoogle Scholar
- Hidler J, Nichols D, Pelliccio M, Brady K, Campbell DD, Kahn JH, Hornby TG: Multicenter randomized clinical trial evaluating the effectiveness of the Lokomat in subacute stroke. Neurorehabil Neural Repair 2009, 23: 5-13.View ArticlePubMedGoogle Scholar
- Lotze M, Braun C, Birbaumer N, Anders S, Cohen LG: Motor learning elicited by voluntary drive. Brain 2003, 126: 866-872. 10.1093/brain/awg079View ArticlePubMedGoogle Scholar
- Kaelin-Lang A, Sawaki L, Cohen LG: Role of voluntary drive in encoding an elementary motor memory. J Neurophysiol 2005, 93: 1099-1103.View ArticlePubMedGoogle Scholar
- Taub E, Uswatte G, Elbert T: New treatments in neurorehabilitation founded on basic research. Nat Rev Neurosci 2002, 3: 228-236.View ArticlePubMedGoogle Scholar
- Perez MA, Lungholt BK, Nyborg K, Nielsen JB: Motor skill training induces changes in the excitability of the leg cortical area in healthy humans. Exp Brain Res 2004, 159: 197-205. 10.1007/s00221-004-1947-5View ArticlePubMedGoogle Scholar
- Israel JF, Campbell DD, Kahn JH, Hornby TG: Metabolic costs and muscle activity patterns during robotic- and therapist-assisted treadmill walking in individuals with incomplete spinal cord injury. Phys Ther 2006, 86: 1466-1478. 10.2522/ptj.20050266View ArticlePubMedGoogle Scholar
- Hidler JM, Wall AE: Alterations in muscle activation patterns during robotic-assisted walking. Clin Biomech (Bristol, Avon) 2005, 20: 184-193. 10.1016/j.clinbiomech.2004.09.016View ArticleGoogle Scholar
- Cai LL, Fong AJ, Otoshi CK, Liang YQ, Cham JG, Zhong H, Roy RR, Edgerton VR, Burdick JW Proc. 2005 IEEE 9th Int. Conf. Rehabil. Robotics. In Effects of consistency vs. variability in robotically controlled training of stepping in adult spinal mice. Chicago, IL, USA; 2005:575-579. June 28 - July 1, 2005Google Scholar
- Jezernik S, Scharer R, Colombo G, Morari M: Adaptive robotic rehabilitation of locomotion: a clinical study in spinally injured individuals. Spinal Cord 2003, 41: 657-666. 10.1038/sj.sc.3101518View ArticlePubMedGoogle Scholar
- Emken JL, Reinkensmeyer DJ: Robot-enhanced motor learning: accelerating internal model formation during locomotion by transient dynamic amplification. IEEE Trans Neural Syst Rehabil Eng 2005, 13: 33-39. 10.1109/TNSRE.2004.843173View ArticlePubMedGoogle Scholar
- Aoyagi D, Ichinose WE, Harkema SJ, Reinkensmeyer DJ, Bobrow JE: A robot and control algorithm that can synchronously assist in naturalistic motion during body-weight-supported gait training following neurologic injury. IEEE Trans Neural Syst Rehabil Eng 2007, 15: 387-400.View ArticlePubMedGoogle Scholar
- Emken JL, Wynne JH, Harkema SJ, Reinkensmeyer DJ: A robotic device for manipulating human stepping. IEEE Trans Robot 2006, 22: 185.View ArticleGoogle Scholar
- Emken JL, Bobrow JE, Reinkensmeyer DJ Proc. 2005 IEEE 9th Int. Conf. Rehabil. Robotics. In Robotic movement training as an optimization problem: designing a controller that assists only as needed. Chicago, IL, USA; 2005:307-312. June 28 - July 1, 2005Google Scholar
- Riener R, Lunenburger L, Jezernik S, Anderschitz M, Colombo G, Dietz V: Patient-cooperative strategies for robot-aided treadmill training: first experimental results. IEEE Trans Neural Syst Rehabil Eng 2005, 13: 380-394. 10.1109/TNSRE.2005.848628View ArticlePubMedGoogle Scholar
- Duschau-Wicke A, von Zitzewitz J, Caprez A, Lunenburger L, Riener R: Path control: a method for patient-cooperative robot-aided gait rehabilitation. IEEE Trans Neural Syst Rehabil Eng 2010, 18: 38-48.View ArticlePubMedGoogle Scholar
- Kim SH, Banala SK, Brackbill EA, Agrawal SK, Krishnamoorthy V, Scholz JP: Robot-assisted modifications of gait in healthy individuals. Exp Brain Res 2010, 202: 809-824. 10.1007/s00221-010-2187-5View ArticlePubMedGoogle Scholar
- Emken JL, Harkema SJ, Beres-Jones JA, Ferreira CK, Reinkensmeyer DJ: Feasibility of manual teach-and-replay and continuous impedance shaping for robotic locomotor training following spinal cord injury. IEEE transactions on bio-medical engineering 2008, 55: 322-334.View ArticlePubMedGoogle Scholar
- Veneman JF, Kruidhof R, Hekman EEG, Ekkelenkamp R, Van Asseldonk EHF, Van der Kooij H: Design and evaluation of the LOPES exoskeleton robot for interactive gait rehabilitation. IEEE Trans Neural Syst Rehabil Eng 2007, 15: 379-386.View ArticlePubMedGoogle Scholar
- Banala SK, Kim SH, Agrawal SK, Scholz JP: Robot assisted gait training with active leg exoskeleton (ALEX). IEEE Trans Neural Syst Rehabil Eng 2009, 17: 2-8.View ArticlePubMedGoogle Scholar
- Cai LL, Fong AJ, Otoshi CK, Liang Y, Burdick JW, Roy RR, Edgerton VR: Implications of assist-as-needed robotic step training after a complete spinal cord injury on intrinsic strategies of motor learning. J Neurosci 2006, 26: 10564-10568. 10.1523/JNEUROSCI.2266-06.2006View ArticlePubMedGoogle Scholar
- Van Asseldonk EHF, Ekkelenkamp R, Veneman JF, Van der Helm FCT, Van der Kooij H Proc. 2007 IEEE 10th Int. Conf. Rehabil. Robotics. In Selective control of a subtask of walking in a robotic gait trainer(LOPES). Noordwijk, Netherlands; 2007:841-848. June 12–15, 2007Google Scholar
- Neptune RR, Clark DJ, Kautz SA: Modular control of human walking: a simulation study. J Biomech 2009, 42: 1282-1287. 10.1016/j.jbiomech.2009.03.009PubMed CentralView ArticlePubMedGoogle Scholar
- McGowan CP, Neptune RR, Clark DJ, Kautz SA: Modular control of human walking: adaptations to altered mechanical demands. J Biomech 2010, 43: 412-419. 10.1016/j.jbiomech.2009.10.009PubMed CentralView ArticlePubMedGoogle Scholar
- Pratt JE: Virtual model control of a biped walking robot. MIT; 1995.Google Scholar
- Van Asseldonk EHF, Koopman B, Buurke JH, Simons CD, Van der Kooij H Proc. 2009 IEEE 11th Int. Conf. Rehabil. Robotics. In Selective and adaptive robotic support of foot clearance for training stroke survivors with stiff knee gait. Kyoto, Japan; 2009:701-706. June 23–26, 2009Google Scholar
- Wolbrecht ET, Chan V, Reinkensmeyer DJ, Bobrow JE: Optimizing compliant, model-based robotic assistance to promote neurorehabilitation. IEEE Trans Neural Syst Rehabil Eng 2008, 16: 286-297.View ArticlePubMedGoogle Scholar
- Koopman B, Grootenboer HJ, de Jongh HJ: An inverse dynamics model for the analysis, reconstruction and prediction of bipedal walking. J Biomech 1995, 28: 1369-1376. 10.1016/0021-9290(94)00185-7View ArticlePubMedGoogle Scholar
- Zeni JA Jr, Richards JG, Higginson JS: Two simple methods for determining gait events during treadmill and overground walking using kinematic data. Gait Posture 2008, 27: 710-714. 10.1016/j.gaitpost.2007.07.007PubMed CentralView ArticlePubMedGoogle Scholar
- Draper NR, Smith H: Applied regression analysis. Hoboken, NJ: Wiley-Interscience; 1998.View ArticleGoogle Scholar
- Street JO, Carroll RJ, Ruppert D: A note on computing robust regression estimates via iteratively reweighted least squares. Am Stat 1988, 42: 152-154.Google Scholar
- Vallery H, Ekkelenkamp R, Van der Kooij H, Buss M IEEE international conference on intelligent robots and systems; october/november. In Passive and accurate torque control of series elastic actuators. San Diego, USA; 2007:3534-3538.Google Scholar
- van Asseldonk EH, Veneman JF, Ekkelenkamp R, Buurke JH, van der Helm FC, van der Kooij H: The effects on kinematics and muscle activity of walking in a robotic gait trainer during zero-force control. IEEE Trans Neural Syst Rehabil Eng 2008, 16: 360-370.View ArticlePubMedGoogle Scholar
- Titianova EB, Tarkka IM: Asymmetry in walking performance and postural sway in patients with chronic unilateral cerebral infarction. J Rehabil Res Dev 1995, 32: 236-244.PubMedGoogle Scholar
- Yano H, Kasai K, Saitou H, Iwata H: Development of a gait rehabilitation system using a locomotion interface. J Visual Comp Animat 2003, 14: 243-252. 10.1002/vis.321View ArticleGoogle Scholar
- Stauffer Y, Allemand Y, Bouri M, Fournier J, Clavel R, Metrailler P, Brodard R, Reynard F: The WalkTrainer–a new generation of walking reeducation device combining orthoses and muscle stimulation. IEEE Trans Neural Syst Rehabil Eng 2009, 17: 38-45.View ArticlePubMedGoogle Scholar
- Colombo G, Joerg M, Schreier R, Dietz V: Treadmill training of paraplegic patients using a robotic orthosis. J Rehabil Res Dev 2000, 37: 693-700.PubMedGoogle Scholar
- Vallery H, van Asseldonk EH, Buss M, van der Kooij H: Reference trajectory generation for rehabilitation robots: complementary limb motion estimation. IEEE Trans Neural Syst Rehabil Eng 2009, 17: 23-30.View ArticlePubMedGoogle Scholar
- Jezernik S, Colombo G, Morani M: Automatic gait-pattern adaptation algorithms for rehabilitation with a 4-DOF robotic orthosis. IEEE Trans Robot Autom 2004, 20: 574-2004. 10.1109/TRA.2004.825515View ArticleGoogle Scholar
- Molloy M, Salazar-Torres J, Kerr C, McDowell BC, Cosgrove AP: The effects of industry standard averaging and filtering techniques in kinematic gait analysis. Gait Posture 2008, 28: 559-562. 10.1016/j.gaitpost.2008.03.012View ArticlePubMedGoogle Scholar
- Von Zitzewitz J, Bernhardt M, Riener R: A novel method for automatic treadmill speed adaptation. IEEE Trans Neural Syst Rehabil Eng 2007, 15: 401-409.View ArticlePubMedGoogle Scholar
- Lelas JL, Merriman GJ, Riley PO, Kerrigan DC: Predicting peak kinematic and kinetic parameters from gait speed. Gait Posture 2003, 17: 106-112. 10.1016/S0966-6362(02)00060-7View ArticlePubMedGoogle Scholar
- Stoquart G, Detrembleur C, Lejeune T: Effect of speed on kinematic, kinetic, electromyographic and energetic reference values during treadmill walking. Neurophysiol Clin 2008, 38: 105-116. 10.1016/j.neucli.2008.02.002View ArticlePubMedGoogle Scholar
- Kerrigan DC, Todd MK, Della Croce U: Gender differences in joint biomechanics during walking: normative study in young adults. Am J Phys Med Rehabil 1998, 77: 2-7. 10.1097/00002060-199801000-00002View ArticlePubMedGoogle Scholar
- Anderson FC, Goldberg SR, Pandy MG, Delp SL: Contributions of muscle forces and toe-off kinematics to peak knee flexion during the swing phase of normal gait: an induced position analysis. J Biomech 2004, 37: 731-737. 10.1016/j.jbiomech.2003.09.018View ArticlePubMedGoogle Scholar
- Kerrigan DC, Gronley J, Perry J: Stiff-legged gait in spastic paresis. A study of quadriceps and hamstrings muscle activity. Am J Phys Med Rehabil 1991, 70: 294-300.View ArticlePubMedGoogle Scholar
- Riley PO, Kerrigan DC: Torque action of two-joint muscles in the swing period of stiff-legged gait: a forward dynamic model analysis. J Biomech 1998, 31: 835-840. 10.1016/S0021-9290(98)00107-9View ArticlePubMedGoogle Scholar
- Reinkensmeyer DJ, Aoyagi D, Emken JL, Galvez JA, Ichinose W, Kerdanyan G, Maneekobkunwong S, Minakata K, Nessler JA, Weber R: Tools for understanding and optimizing robotic gait training. J Rehabil Res Dev 2006, 43: 657-670. 10.1682/JRRD.2005.04.0073View ArticlePubMedGoogle Scholar
- Emken JL, Benitez R, Sideris A, Bobrow JE, Reinkensmeyer DJ: Motor adaptation as a greedy optimization of error and effort. J Neurophysiol 2007, 97: 3997-4006. 10.1152/jn.01095.2006View ArticlePubMedGoogle Scholar
- Emken JL, Benitez R, Reinkensmeyer DJ: Human-robot cooperative movement training: learning a novel sensory motor transformation during walking with robotic assistance-as-needed. J Neuroengineering Rehabil 2007, 4: 8. 10.1186/1743-0003-4-8PubMed CentralView ArticleGoogle Scholar
- Bays PM, Wolpert DM: Computational principles of sensorimotor control that minimize uncertainty and variability. J Physiol 2007, 578: 387-396.PubMed CentralView ArticlePubMedGoogle Scholar
- Patton JL, Stoykov ME, Kovic M, Mussa-Ivaldi FA: Evaluation of robotic training forces that either enhance or reduce error in chronic hemiparetic stroke survivors. Exp Brain Res 2006, 168: 368-383. 10.1007/s00221-005-0097-8View ArticlePubMedGoogle Scholar
- Teasell RW, Bhogal SK, Foley NC, Speechley MR: Gait retraining post stroke. Top Stroke Rehabil 2003, 10: 34-65.View ArticlePubMedGoogle Scholar
- Banz R, Bolliger M, Colombo G, Dietz V, Lunenburger L: Computerized visual feedback: an adjunct to robotic-assisted gait training. Phys Ther 2008, 88: 1135-1145. 10.2522/ptj.20070203View ArticlePubMedGoogle Scholar
- DeQuervain IAK, Simon SR, Leurgans S, Pease WS, McAllister D: Gait pattern in the early recovery period after stroke. J Bone Joint Surg Am 1996, 78A: 1506-1514.Google Scholar
- Kwakkel G, Kollen B, Lindeman E: Understanding the pattern of functional recovery after stroke: facts and theories. Restor Neurol Neurosci 2004, 22: 281-299.PubMedGoogle Scholar
- Chen G, Patten C, Kothari DH, Zajac FE: Gait differences between individuals with post-stroke hemiparesis and non-disabled controls at matched speeds. Gait Posture 2005, 22: 51-56. 10.1016/j.gaitpost.2004.06.009View ArticlePubMedGoogle Scholar
- Kerrigan DC, Frates EP, Rogan S, Riley PO: Hip hiking and circumduction: quantitative definitions. Am J Phys Med Rehabil 2000, 79: 247-252. 10.1097/00002060-200005000-00006View ArticlePubMedGoogle Scholar
- Bowden MG, Balasubramanian CK, Neptune RR, Kautz SA: Anterior-posterior ground reaction forces as a measure of paretic leg contribution in hemiparetic walking. Stroke 2006, 37: 872-876. 10.1161/01.STR.0000204063.75779.8dView ArticlePubMedGoogle Scholar
- Buurke JH, Nene AV, Kwakkel G, Erren-Wolters V, IJzerman MJ, Hermens HJ: Recovery of gait after stroke: what changes? Neurorehabil Neural Repair 2008, 22: 676-683. 10.1177/1545968308317972View ArticlePubMedGoogle Scholar
- Kelly BM, Pangilinan PH Jr, Rodriguez GM: The stroke rehabilitation paradigm. Phys Med Rehabil Clin N Am 2007, 18: 631-650. v 10.1016/j.pmr.2007.07.006View ArticlePubMedGoogle Scholar
- Duschau-Wicke A, Von Zitzewitz J, Banz R, Riener R Proc. 2007 IEEE 10th Int. Conf. Rehabil. Robotics. In Iterative learning synchronization of robotic rehabilitation tasks. Volketswil: ETH Zurich; 2007:335-340. 13-15 June, 2007Google Scholar
- Hesse S, Helm B, Krajnik J, Gregoric M, Mauritz KH: Treadmill training with partial body weight support: influence of body weight release on the gait of hemiparetic patients. J Neurol Rehabil 1997, 11: 15-20.Google Scholar
- Dietz V, Muller R, Colombo G: Locomotor activity in spinal man: significance of afferent input from joint and load receptors. Brain 2002, 125: 2626-2634. 10.1093/brain/awf273View ArticlePubMedGoogle Scholar
- Van Der Kooij H, Koopman B, Van Asseldonck EHF Proc. 2008 IEEE EMBS 30th Annual Int. Conf. Eng Med Biol Soc. In Body weight support by virtual model control of an impedance controlled exoskeleton (LOPES) for gait training. Vancouver, Canada; 2008:1969-1972. August 20–24Google Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.